分类
标准

DIN EN ISO 23210-2009 固定源排放 烟道气中PM10/PM2.5质量浓度的测定 使用撞击取样器在低浓度下测量

《固定源排放 烟道气中PM10/PM2.5质量浓度的测定 使用撞击取样器在低浓度下测量》的编号是DIN EN ISO 23210-2009,目前的状态为现行,实施日期是2009-12-01,该标准分类为环境保护,污染物排放标准。

标准编号:DIN EN ISO 23210-2009

状态:现行

强制性标准:

实施日期:2009-12-01

开本页数:48

采用关系:DIN EN ISO 23210-2009

中图分类号:Z6

中国标准分类号:Z;Z60

国际标准分类号:13;13.040.40

《固定源排放 烟道气中PM10/PM2.5质量浓度的测定 使用撞击取样器在低浓度下测量》是环境保护,污染物排放标准分类下的标准,This International Standard specifies a standard reference method for the determination of PM10 and PM2, 5 mass concentrations at stationary emission sources by use of two-stage inpactors. The measurement method is especially suitable for measurements of mass concentrations below 50 mg/m3 as half-hourly averages at standard conditions (273 K, 1013 hPa, dry gas). It is an acceptable method for the measurement in the flue gas of different installations such as cement and steel production as well as combustion processes. This International Standard is not applicable to sampling of flue gases that are saturated with water-vapour. This International Standard is not applicable where the majority of the particles are likely to exceed PM10 e. g. in case of raw gases or plant operating failures. This International Standard may not be used for the determination of the total mass concentration of dust.其主要内容是取样器,气中,PM2.5,PM10。

以上就是关于固定源排放 烟道气中PM10/PM2.5质量浓度的测定 使用撞击取样器在低浓度下测量的介绍。

发表评论

电子邮件地址不会被公开。 必填项已用*标注