分类
标准

ASTM D6969-2003(2008) 分析用煅烧石油焦试样的制备规程

《分析用煅烧石油焦试样的制备规程》的编号是ASTM D6969-2003(2008),目前的状态为现行,实施日期是2003-11-01,该标准分类为石油,石油产品。

标准编号:ASTM D6969-2003(2008)

状态:现行

强制性标准:

实施日期:2003-11-01

开本页数:3

采用关系:ASTM D6969-2003(2008)

中图分类号:E3

中国标准分类号:E;E44

国际标准分类号:75;75.160.10

《分析用煅烧石油焦试样的制备规程》是石油,石油产品分类下的标准,This practice provides field personnel and laboratories with standard procedures for dividing, reducing, and mixing gross samples and intermediate samples, such that the resulting prepared analysis samples are more uniform from laboratory to laboratory. Adherence to these guidelines is expected to provide significant reduction in interlaboratory variability.1.1 This practice covers the preparation procedures necessary for the reduction and division of calcined petroleum coke samples in order to generate appropriate analytical samples upon which physical and chemical analytical tests will be performed. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.其主要内容是试样,规程,煅烧,石油焦。

以上就是关于分析用煅烧石油焦试样的制备规程的介绍。

分类
标准

BS 1446-1973 道路与人行道用地沥青砂胶(天然岩石地沥青细集料)规范

《道路与人行道用地沥青砂胶(天然岩石地沥青细集料)规范》的编号是BS 1446-1973,目前的状态为现行,实施日期是1973-01-01,该标准分类为石油,石油产品。

标准编号:BS 1446-1973

状态:现行

强制性标准:

实施日期:1973-01-01

开本页数:12

采用关系:BS 1446-1973

中图分类号:E3

中国标准分类号:E;E43

国际标准分类号:93;93.080.20

《道路与人行道用地沥青砂胶(天然岩石地沥青细集料)规范》是石油,石油产品分类下的标准,Recommendations for laying, information for enquiries and/or orders appended.其主要内容是人行道,集料,地沥青,砂胶。

以上就是关于道路与人行道用地沥青砂胶(天然岩石地沥青细集料)规范的介绍。

分类
标准

ASTM D664-2006a 通过电位滴定法对石油产品酸值的试验方法

《通过电位滴定法对石油产品酸值的试验方法》的编号是ASTM D664-2006a,目前的状态为废止,该标准分类为石油,石油产品。

标准编号:ASTM D664-2006a

状态:废止

强制性标准:

开本页数:8

采用关系:ASTM D664-2006a

中图分类号:E3

中国标准分类号:E;E30

国际标准分类号:75;75.080,75.080

《通过电位滴定法对石油产品酸值的试验方法》是石油,石油产品分类下的标准,其主要内容是电位,滴定法,试验,酸值。

以上就是关于通过电位滴定法对石油产品酸值的试验方法的介绍。

分类
标准

ASTM D5147-2007a 取样和测试改性沥青板材料的试验方法

《取样和测试改性沥青板材料的试验方法》的编号是ASTM D5147-2007a,目前的状态为废止,该标准分类为石油,石油产品。

标准编号:ASTM D5147-2007a

状态:废止

强制性标准:

开本页数:7

采用关系:ASTM D5147-2007a

中图分类号:E3

中国标准分类号:E;E43

国际标准分类号:91;91.100.50,91.100.50

《取样和测试改性沥青板材料的试验方法》是石油,石油产品分类下的标准,其主要内容是测试,取样,试验,改性沥青。

以上就是关于取样和测试改性沥青板材料的试验方法的介绍。

分类
标准

NF M07-002-2000 石油产品蒸馏

《石油产品蒸馏》的编号是NF M07-002-2000,目前的状态为现行,该标准分类为石油,石油产品。

标准编号:NF M07-002-2000

状态:现行

强制性标准:

开本页数:40

采用关系:NF M07-002-2000

中图分类号:E3

中国标准分类号:E;E30

国际标准分类号:75;75.080

《石油产品蒸馏》是石油,石油产品分类下的标准,其主要内容是产品,石油,蒸馏。

以上就是关于石油产品蒸馏的介绍。

分类
标准

ASTM D6700-2001(2006) 源自废轮胎的燃油的使用规程

《源自废轮胎的燃油的使用规程》的编号是ASTM D6700-2001(2006),目前的状态为现行,实施日期是2001-08-10,该标准分类为石油,石油产品。

标准编号:ASTM D6700-2001(2006)

状态:现行

强制性标准:

实施日期:2001-08-10

开本页数:10

采用关系:ASTM D6700-2001(2006)

中图分类号:E3

中国标准分类号:E;E30

国际标准分类号:83;83.160.01

《源自废轮胎的燃油的使用规程》是石油,石油产品分类下的标准,1.1 This practice covers and provides guidance for the material recovery of scrap tires for their fuel value. The conversion of a whole scrap tire into a chipped formed for use as a fuel produces a product called tire-derived fuel (TDF). This recovery practice has moved from a pioneering concept in the early 1980s to a proven and continuous use in the United States with industrial and utility applications.1.2 Combustion units engineered to use solid fuels, such as coal or wood or both, are fairly numerous throughout the U.S. Many of these units are now using TDF even though they were not specifically designed to burn TDF. It is clear that TDF has combustion characteristics similar to other carbon-based solid fuels. Similarities led to pragmatic testing in existing combustion units. Successful testing led to subsequent acceptance of TDF as a supplemental fuel when blended with conventional fuels in existing combustion devices. Changes required to modify appropriate existing combustion units to accommodate TDF range from none to relatively minor. The issues of proper applications and specifications are critical to successful utilization of this alternative energy resource.1.3 This practice explains TDF”s use when blended and combusted under normal operating conditions with originally specified fuels. Whole tire combustion for energy recovery is not discussed herein since whole tire usage does not require tire processing to a defined fuel specification.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.其主要内容是燃油,规程,源自,废轮胎。

以上就是关于源自废轮胎的燃油的使用规程的介绍。

分类
标准

ASTM D3954-1994(2010) 石蜡滴点的测试方法

《石蜡滴点的测试方法》的编号是ASTM D3954-1994(2010),目前的状态为现行,实施日期是1994-11-15,该标准分类为石油,石油产品。

标准编号:ASTM D3954-1994(2010)

状态:现行

强制性标准:

实施日期:1994-11-15

开本页数:2

采用关系:ASTM D3954-1994(2010)

中图分类号:E3

中国标准分类号:E;E42

国际标准分类号:71;71.100.99

《石蜡滴点的测试方法》是石油,石油产品分类下的标准,Waxes do not go through a sharp solid-liquid phase change when heated and therefore do not have a true melting point. As the temperature rises, waxes gradually soften or become less viscous. For this reason, the determination of the softening point must be made by an arbitrary but closely defined method if test values are to be reproducible. This test is useful in determining the consistency of waxes, and as one element in establishing the uniformity of shipments or source of supply. This test method has been found suitable for all types of waxes including paraffin, microcrystalline polyethylene, and natural waxes.1.1 This test method covers the determination of the ASTM dropping point for waxes. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.其主要内容是石蜡,滴点,测试方法。

以上就是关于石蜡滴点的测试方法的介绍。

分类
标准

DIN 51358-1996 润滑剂检验.对发动机防腐油防腐性能的检验.海水浸泡试验

《润滑剂检验.对发动机防腐油防腐性能的检验.海水浸泡试验》的编号是DIN 51358-1996,目前的状态为作废,该标准分类为石油,石油产品。

标准编号:DIN 51358-1996

状态:作废

强制性标准:

开本页数:3

采用关系:DIN 51358-1996

中图分类号:E3

中国标准分类号:E;E34

国际标准分类号:75;75.100

《润滑剂检验.对发动机防腐油防腐性能的检验.海水浸泡试验》是石油,石油产品分类下的标准,其主要内容是浸泡,防腐,润滑剂,检验。

以上就是关于润滑剂检验.对发动机防腐油防腐性能的检验.海水浸泡试验的介绍。

分类
标准

KS M2196-1991 锈发生度试验方法

《锈发生度试验方法》的编号是KS M2196-1991,目前的状态为现行,该标准分类为石油,石油产品。

标准编号:KS M2196-1991

状态:现行

强制性标准:

开本页数:3

采用关系:KS M2196-1991

中图分类号:E3

中国标准分类号:E;E34

国际标准分类号:75;75.100

《锈发生度试验方法》是石油,石油产品分类下的标准,其主要内容是发生,试验,方法。

以上就是关于锈发生度试验方法的介绍。

分类
标准

DIN EN 12697-16-2004 沥青混合物 热混合沥青的检验 第16部分:尖铁轮胎磨损

《沥青混合物 热混合沥青的检验 第16部分:尖铁轮胎磨损》的编号是DIN EN 12697-16-2004,目前的状态为作废,该标准分类为石油,石油产品。

标准编号:DIN EN 12697-16-2004

状态:作废

强制性标准:

开本页数:19

采用关系:DIN EN 12697-16-2004

中图分类号:E3

中国标准分类号:E;E43

国际标准分类号:93;93.080.20

《沥青混合物 热混合沥青的检验 第16部分:尖铁轮胎磨损》是石油,石油产品分类下的标准,This Standard describes two alternative procedures (method A and method B) for preparing and determination of abrasion caused by studded tyres, tested on cylindrical specimens of bituminous mixtures. Note 1: Both methods (A and B) may be used where relevant for determination of abrasion by studded tyres. Note 2: Method A originates from the Prall-method, but it is improved by comprehensive research work to meet an adequate design. According to Swedish research work the method correlates with abrasion in the field. Method B originates from Finnish experience and correlates with abrasion in the field.其主要内容是16,尖铁,沥青,磨损。

以上就是关于沥青混合物 热混合沥青的检验 第16部分:尖铁轮胎磨损的介绍。