分类
标准

ASTM D6969-2003(2008) 分析用煅烧石油焦试样的制备规程

《分析用煅烧石油焦试样的制备规程》的编号是ASTM D6969-2003(2008),目前的状态为现行,实施日期是2003-11-01,该标准分类为石油,石油产品。

标准编号:ASTM D6969-2003(2008)

状态:现行

强制性标准:

实施日期:2003-11-01

开本页数:3

采用关系:ASTM D6969-2003(2008)

中图分类号:E3

中国标准分类号:E;E44

国际标准分类号:75;75.160.10

《分析用煅烧石油焦试样的制备规程》是石油,石油产品分类下的标准,This practice provides field personnel and laboratories with standard procedures for dividing, reducing, and mixing gross samples and intermediate samples, such that the resulting prepared analysis samples are more uniform from laboratory to laboratory. Adherence to these guidelines is expected to provide significant reduction in interlaboratory variability.1.1 This practice covers the preparation procedures necessary for the reduction and division of calcined petroleum coke samples in order to generate appropriate analytical samples upon which physical and chemical analytical tests will be performed. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.其主要内容是试样,规程,煅烧,石油焦。

以上就是关于分析用煅烧石油焦试样的制备规程的介绍。

分类
标准

ASTM D6700-2001(2006) 源自废轮胎的燃油的使用规程

《源自废轮胎的燃油的使用规程》的编号是ASTM D6700-2001(2006),目前的状态为现行,实施日期是2001-08-10,该标准分类为石油,石油产品。

标准编号:ASTM D6700-2001(2006)

状态:现行

强制性标准:

实施日期:2001-08-10

开本页数:10

采用关系:ASTM D6700-2001(2006)

中图分类号:E3

中国标准分类号:E;E30

国际标准分类号:83;83.160.01

《源自废轮胎的燃油的使用规程》是石油,石油产品分类下的标准,1.1 This practice covers and provides guidance for the material recovery of scrap tires for their fuel value. The conversion of a whole scrap tire into a chipped formed for use as a fuel produces a product called tire-derived fuel (TDF). This recovery practice has moved from a pioneering concept in the early 1980s to a proven and continuous use in the United States with industrial and utility applications.1.2 Combustion units engineered to use solid fuels, such as coal or wood or both, are fairly numerous throughout the U.S. Many of these units are now using TDF even though they were not specifically designed to burn TDF. It is clear that TDF has combustion characteristics similar to other carbon-based solid fuels. Similarities led to pragmatic testing in existing combustion units. Successful testing led to subsequent acceptance of TDF as a supplemental fuel when blended with conventional fuels in existing combustion devices. Changes required to modify appropriate existing combustion units to accommodate TDF range from none to relatively minor. The issues of proper applications and specifications are critical to successful utilization of this alternative energy resource.1.3 This practice explains TDF”s use when blended and combusted under normal operating conditions with originally specified fuels. Whole tire combustion for energy recovery is not discussed herein since whole tire usage does not require tire processing to a defined fuel specification.1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.其主要内容是燃油,规程,源自,废轮胎。

以上就是关于源自废轮胎的燃油的使用规程的介绍。

分类
标准

ASTM D5854-1996(2005) 石油和石油产品液体试样的混合与加工规程

《石油和石油产品液体试样的混合与加工规程》的编号是ASTM D5854-1996(2005),目前的状态为作废,实施日期是1996-01-10,该标准分类为石油,石油产品。

标准编号:ASTM D5854-1996(2005)

状态:作废

强制性标准:

实施日期:1996-01-10

开本页数:19

采用关系:ASTM D5854-1996(2005)

中图分类号:E3

中国标准分类号:E;E30

国际标准分类号:19;19.020

《石油和石油产品液体试样的混合与加工规程》是石油,石油产品分类下的标准,其主要内容是试样,规程,石油,液体。

以上就是关于石油和石油产品液体试样的混合与加工规程的介绍。

分类
标准

ASTM D3791-2004 热对沥青影响的评定规程

《热对沥青影响的评定规程》的编号是ASTM D3791-2004,目前的状态为废止,实施日期是2004-01-01,该标准分类为石油,石油产品。

标准编号:ASTM D3791-2004

状态:废止

强制性标准:

实施日期:2004-01-01

开本页数:2

采用关系:ASTM D3791-2004

中图分类号:E3

中国标准分类号:E;E43

国际标准分类号:91;91.100.50

《热对沥青影响的评定规程》是石油,石油产品分类下的标准,When asphalts are maintained at elevated temperatures in the presence of air, their characteristics may change. Certain blown asphalts also soften when maintained near, and particularly above, their final blowing temperatures under virtually air-free conditions. This may happen if the asphalt is overheated for application purposes. This practice provides a uniform heat-treatment procedure and methods for evaluating the effect of this treatment on some of the characteristics of asphalts. Changes observed when asphalts are overheated are not indicative of changes to be expected when asphalts are heated to normal application temperatures.1.1 This practice covers a procedure for evaluating some of the effects on asphalts of heating in the presence of little or no air. 1.2 This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.其主要内容是规程,热对,沥青,评定。

以上就是关于热对沥青影响的评定规程的介绍。

分类
标准

ASTM D5361-2005 实验室试验用取样密集沥青混合物的规程

《实验室试验用取样密集沥青混合物的规程》的编号是ASTM D5361-2005,目前的状态为作废,实施日期是2005-07-15,该标准分类为石油,石油产品。

标准编号:ASTM D5361-2005

状态:作废

强制性标准:

实施日期:2005-07-15

开本页数:3

采用关系:ASTM D5361-2005

中图分类号:E3

中国标准分类号:E;E43

国际标准分类号:75;75.140

《实验室试验用取样密集沥青混合物的规程》是石油,石油产品分类下的标准,其主要内容是混合物,规程,取样,沥青。

以上就是关于实验室试验用取样密集沥青混合物的规程的介绍。

分类
标准

ASTM D6974-2004 液体燃料中活菌和真菌计数规程-过滤和培养程序

《液体燃料中活菌和真菌计数规程-过滤和培养程序》的编号是ASTM D6974-2004,目前的状态为作废,实施日期是2004-05-01,该标准分类为石油,石油产品。

标准编号:ASTM D6974-2004

状态:作废

强制性标准:

实施日期:2004-05-01

开本页数:5

采用关系:ASTM D6974-2004

中图分类号:E3

中国标准分类号:E;E31

国际标准分类号:75;75.160.20

《液体燃料中活菌和真菌计数规程-过滤和培养程序》是石油,石油产品分类下的标准,其主要内容是计数,规程,液体燃料,中活。

以上就是关于液体燃料中活菌和真菌计数规程-过滤和培养程序的介绍。

分类
标准

ASTM D6081-1998(2004) 润滑油水生物毒性测试规程:试样制备和实验结果说明

《润滑油水生物毒性测试规程:试样制备和实验结果说明》的编号是ASTM D6081-1998(2004),目前的状态为作废,实施日期是1998-05-10,该标准分类为石油,石油产品。

标准编号:ASTM D6081-1998(2004)

状态:作废

强制性标准:

实施日期:1998-05-10

开本页数:7

采用关系:ASTM D6081-1998(2004)

中图分类号:E3

中国标准分类号:E;E34

国际标准分类号:13;13.020.40

《润滑油水生物毒性测试规程:试样制备和实验结果说明》是石油,石油产品分类下的标准,其主要内容是试样,规程,水生物,润滑油。

以上就是关于润滑油水生物毒性测试规程:试样制备和实验结果说明的介绍。

分类
标准

ASTM D1946-1990(2006) 用气相色谱法对重整气的分析规程

《用气相色谱法对重整气的分析规程》的编号是ASTM D1946-1990(2006),目前的状态为废止,实施日期是1990-03-30,该标准分类为石油,石油产品。

标准编号:ASTM D1946-1990(2006)

状态:废止

强制性标准:

实施日期:1990-03-30

开本页数:5

采用关系:ASTM D1946-1990(2006)

中图分类号:E3

中国标准分类号:E;E46

国际标准分类号:75;75.160.30

《用气相色谱法对重整气的分析规程》是石油,石油产品分类下的标准,The information about the chemical composition can be used to calculate physical properties of the gas, such as heating (calorific) value and relative density. Combustion characteristics, products of combustion, toxicity, and interchangeability with other fuel gases may also be inferred from the chemical composition.1.1 This practice covers the determination of the chemical composition of reformed gases and similar gaseous mixtures containing the following components: hydrogen, oxygen, nitrogen, carbon monoxide, carbon dioxide, methane, ethane, and ethylene.This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.其主要内容是气相,色谱法,重整,规程。

以上就是关于用气相色谱法对重整气的分析规程的介绍。

分类
标准

ASTM D5360-2005 沥青表面处理的设计与施工规程

《沥青表面处理的设计与施工规程》的编号是ASTM D5360-2005,目前的状态为作废,实施日期是2005-02-01,该标准分类为石油,石油产品。

标准编号:ASTM D5360-2005

状态:作废

强制性标准:

实施日期:2005-02-01

开本页数:3

采用关系:ASTM D5360-2005

中图分类号:E3

中国标准分类号:E;E43

国际标准分类号:93;93.080.20

《沥青表面处理的设计与施工规程》是石油,石油产品分类下的标准,其主要内容是规程,施工,沥青,表面。

以上就是关于沥青表面处理的设计与施工规程的介绍。

分类
标准

ASTM E2412-2010 通过用博立叶变换红外线光谱法的趋势分析法对用过的润滑油的状况进行监控的规程

《通过用博立叶变换红外线光谱法的趋势分析法对用过的润滑油的状况进行监控的规程》的编号是ASTM E2412-2010,目前的状态为现行,实施日期是2010-05-01,该标准分类为石油,石油产品。

标准编号:ASTM E2412-2010

状态:现行

强制性标准:

实施日期:2010-05-01

开本页数:24

采用关系:ASTM E2412-2010

中图分类号:E3

中国标准分类号:E;E34

国际标准分类号:75;75.100

《通过用博立叶变换红外线光谱法的趋势分析法对用过的润滑油的状况进行监控的规程》是石油,石油产品分类下的标准,Periodic sampling and analysis of lubricants have long been used as a means to determine overall machinery health. Atomic emission (AE) and atomic absorption (AA) spectroscopy are often employed for wear metal analysis (for example, Test Method D5185). A number of physical property tests complement wear metal analysis and are used to provide information on lubricant condition (for example, Test Methods D445, D2896, and D6304). Molecular analysis of lubricants and hydraulic fluids by FT-IR spectroscopy produces direct information on molecular species of interest, including additives, fluid breakdown products and external contaminants, and thus complements wear metal and other analyses used in a condition monitoring program (1,3-7).1.1 This practice covers the use of FT-IR in monitoring additive depletion, contaminant buildup and base stock degradation in machinery lubricants, hydraulic fluids and other fluids used in normal machinery operation. Contaminants monitored include water, soot, ethylene glycol, fuels and incorrect oil. Oxidation, nitration and sulfonation of base stocks are monitored as evidence of degradation. The objective of this monitoring activity is to diagnose the operational condition of the machine based on fault conditions observed in the oil. Measurement and data interpretation parameters are presented to allow operators of different FT-IR spectrometers to compare results by employing the same techniques. 1.2 This practice is based on trending and distribution response analysis from mid-infrared absorption measurements. While calibration to generate physical concentration units may be possible, it is unnecessary or impractical in many cases. Warning or alarm limits (the point where maintenance action on a machine being monitored is recommended or required) can be determined through statistical analysis, history of the same or similar equipment, round robin tests or other methods in conjunction with correlation to equipment performance. These warning or alarm limits can be a fixed maximum or minimum value for comparison to a single measurement or can also be based on a rate of change of the response measured (1). This practice describes distributions but does not preclude using rate-of-change warnings and alarms. Note 18212;It is not the intent of this practice to establish or recommend normal, cautionary, warning or alert limits for any machinery. Such limits should be established in conjunction with advice and guidance from the machinery manufacturer and maintenance group. 1.3 Spectra and distribution profiles presented herein are for illustrative purposes only and are not to be construed as representing or establishing lubricant or machinery guidelines. 1.4 This practice is designed as a fast, simple spectroscopic check for condition monitoring of in-service lubricants and can be used to assist in the determination of general machinery health through measurement of properties observable in the mid-infrared spectrum such as water, oil oxidation, and others as noted in 1.1. The infrared data generated by this practice is typically used in conjunction with other testing methods. For example, infrared spectroscopy cannot determine wear metal levels or any other type of elemental analysis. The practice as presented is not intended for the prediction of lubricant physical properties (for example, viscosity, total base number, total acid number, etc.). This prac……其主要内容是光谱法,用博立,规程,对用。

以上就是关于通过用博立叶变换红外线光谱法的趋势分析法对用过的润滑油的状况进行监控的规程的介绍。